Custom Fabrication Aluminium High Precision
Cooperation model: OEM or ODM
Design:As per customer specific requirements
or customer give us the specified sample;
or the customer conceptual or preliminary design;
or the customer sketched idea.
Accept drawing format: .jpg / .dwg / .igs / .stp etc..
Material: Sheet stock is of many materials, including carbon steel, alloy steel, stainless steel, aluminum, brass even plastics.
Material condition: On flat sheet, plate coil supplying condition
Hot rolled or cold rolled or cold drawn for options.
Material thickness: As per specifications
Application material standard:
If there is no any specially requirement, we often suggest our customer to try the equivalent China National (GB) standard material that our engineering team proposes which to be properly converted from ANSI, ASTM, SAE, EN, DIN, BS, JIS, and etc., to contribute the material cost control.
If it is necessary to use exact designated material no., it is also possible choice.
Available processing (Technique):
-Shearing-Laser cutting-Bending-Stamping-Pressing-Deep drawing-Rolling-Forming-Fabricating-Drilling-Tapping
Precision: Average level: ±0.05mm, depending the part size and thickness and material
Tooling in house: To design and build the necessary tooling in own house, for the tooling we never add any margins, it just cost.
Shearing machines: 2 sets, Max. Width 4000mm×Thickness 6mm
CNC punching machines: 3 sets, Max. Width 3000mm×1500 Thickness 6mm
CNC laser cutting machine: 1 set, Max. cutting size 2000mm×4000mm ( The thickness limitation of, Carbon steel: 16mm, Stainless steel: 10mm, Aluminum: 6mm)
Plasma cutting machines by manual operation: 2 sets
Mechanical punching machines: 100 sets from 5 to 100 metric tons
Hydraulic pressing machines: 4 sets from 100 to 260 metric tons
Rolling machines (4-rollers): 3 sets, Max. Width 2000mm×Thickness 12mm
Spot welding: 2 sets
GWMA (CO2 Gas Shielded Arc Welding) machines: 6 sets
TIG (Tungsten Insert Gas Welding) machines: 6 sets
Powder coating line: 1 sets
CNC bending machines: 3 sets,Max.Width:3000mm
Powder coating ovens:2 sets
Surface treatment: We do powder coating in house and our suppliers help us to supply our customers a wide range of surface finish solution, such as hot dip galvanizing, zinc plating, nickel plating, chrome plating, powder coating, epoxy painting, anodizing, black oxide, E-coating and etc.
Whole inspection procedures (IQC, PQC and FQC) and QA plan are carried out in house to be compliance with the rules and regulation of ISO 9001:2000
Quality control always be doing on site and on time, never try to do later;
If the customer found it is necessary any third authorized inspection organization are welcomed to witness the quality before the shipment.
Strictly in accordance with the customer specific instruction on the packing
We can package for retail if needed
If no any specified, generally we would recommend that the parts to be packaged by a poly bags, then put them in cartons, and finally to be on the pallets. The gross weight of one carton is not more than 22kg and pallet size try to approaching 120cm×80cm (Europe size) and 42"×42" (US size)
The package is seaworthy and suitable for export. The wooden package material shall be steamed with the certificated and stamped by CCIB
Applicable field: All kinds of auto parts, machinery parts, computer parts, medical parts, home appliances, electrical equipment parts, electrical appliance parts, electronic products parts, electronic parts, generator parts, alternator parts, dynamo parts, electric generator parts, stationery, power switches, miniature switches, architecture, commodity and A/V equipment, hardware and plastic molds, sports equipment and gifts, etc.
The metal parts showed on our website are not for sale, it just for sales promotion purpose it is to explain for our potential customers that we had produced or are capable of making such similar metal parts or supply same metal processing services.
For any custom metal parts before mass production, we need our customer to confirm and approve the working samples.
YOUHE Metal Working specialize in custom sheet metal metalwork fabrication for different kinds of materials with high precision laser cutting, CNC punching, stamping, bending, machining, welding, powder coating and assembly service. As a factory with 25000 square meter workshop and 100 workers , we are able to save cost of labor and shorten production lead time, which enables us to compete with others. "First class quality with competitive price is the source of business." is our motto.
User First,Quality First,Reputation First,Service First!
1.Rich OEM ODM Experience: over 20 years factory experience, 5 years exporting experience, shareholding system company professional OEM ODM custom in metal products across all industries;
2.Quality Service: full-service company specializing in high quality, low cost, precision metal stampings and sheet metal fabrication. Youhe's sales and technical staff are here to serve you and help you make your project a success.
3.Advanced Design Tools: top notch in-house lifetime tooling program;
4.State-of-the-art technology& highly skilled engineers: advanced metal stamping, sheet metal fabrication and CNC machining facilities with highly trained operators;
5.Global Clients: we have clients from USA, Canada, Europe, Australia, Japan and other foreign countries.
6.No Minimum Orders: we're here to help our customers get their jobs done, so we'll give your order the same priority and respect, whether it's a single component for a one-off project, or a production run of thousands.
7.One-Stop Shopping: we supply fully finished products in your choice of steel, aluminum, stainless, copper, brass or other metals, with surface treatment and value-added services including cutouts, powder coat, silkscreen, fasteners, and hardware, all in one easy stop, to save you time.
8.Rapid Production: we offer unheard-of manufacturing speed. 5-7 days build samples, 15-20 days do the mass production;
MAIN MACHINES INTRODUCTION
AMADA CNC Punching Machine 3 Sets -Processing Scope 1.5*3.5 meters
Laser Cutting Machine 1 Set -Processing Scope 2*4meters
Max thickness:20mm(Steel),16mm(Stainless Steel),6mm(Aluminium)
Shearing Machines 2 Sets -Processing Scope 4meters
Max thickness:6mm(Steel),3mm(Stainless Steel),8mm(Aluminium)
AMADA bending machine 4 Sets -Processing Scope 3mm 100T
Pressing Machines over 100 Sets 100T-300T
Powder Coating Line and Pre-treatment Tanks
Rolling Machines 3 Sets TIG,MIG,Spot Welding Machines 15 Sets
CNC Machining Center CNC Machine Center
High Precision CNC Machining Center-Custom CNC Machined Parts
High Precision Pressing Parts / Hydraulic Press Processing
Aluminium Custom Fabrication -Aluminium Truck Box / Aluminium Training Bike Frame / Aluminium Mailbox
High Quality Stainless Steel Fabrication
AUSTRALIA-THE HAINES GROUP-The largest manufacturer of FRP boats in Australia under the brand names,Signature,Traveller and Seafarer.
We offer tube fabrication service to HAINES on their engine display rack with 65*65*4mm square tube material that is not common tube size in China.
- CIRCUITWISE -a Sydney based Contact Electronics Manufacturer holding ISO9000 and ISO13485 Medical certifications.
We offer sheet metal fabrication service to CIRCUITWISE on their smart inventory rack.
USA -RELIABLE GOODS
We made custom smart aluminium template for drawers on annual qty 20,000 sets.
CANADA-MAMMOTH GROUP INC
We offer bracket fabrication with hot dip galvanized to MAMMOTH with annual qty at least 500,000 pcs.
Brackets are made by 10mm 345B steel with corresponding welding material.
We will sincerely create and share
success with all clients. We’re not
only providing OEM service, but
also a trustworthy partner for your
sourcing in China.
Because of the advanced equipment,
excellent management and reasonable
price, Our products are more and more
popular among our clients.
Precision / Best Quality / Customized
1. YOUHE working factory follow up ISO9001,
QC dept. run IQC----IPQC---FQC.
2. F.A. Parts: 100% dimensions inspection report.
3. For special precision parts, QC dept.provide SPC,
Cpk, Ppk data sheet to customer from F.A to
Packing & Delivery Details :
1. Engineer design packing material and carton size depend on different metal products.
2. Anti-Static plastic foam.
3. Using strong export carton with 5~6 layer
4. Using Pallet for mass products.
5. Depend on cargoes weight have Express, Air and Ocean freight.
6. Shipped in 20-30 working days after Sample Approval.
Step 1: provide your drawings and requirements about Products.
Step 2: confirm products details.
Step 3: confirm cost, freight and delivery.
a. Sample unit cost will be 3 times based on the final quotation.If sample is under 15USD,we can offer sample for free.Customers only need to pay for its shipment.
b. Because samples are customized, it takes us more labor costs than mass production.
c. Usually sample delivery time is around 10 to 20 days.(up to the products)
Step 4: provide PI to you, you make payment accordingly.
Step 5: we start production, and keep you informed updated news.
Step 6: send you details,photos and QI report when qualified sample is finished.
Step 7: make shipment after above information is confirmed.
FAQ-The questions you may concern
1.Q:Do you have the products in stock?
A:NO,we are OEM/ODM factory, do not have stock, we only produce according to customer's drawing and sample.
2.Q:Which kind of material you can produce?
A:For most metal parts,include steel,stainless steel,aluminum,carbon steel,etc
3.Q:Can you do surface treatment?
A:Yes,we have mature professional cooperation surface treatment factory,provide powder coating,anodizing,zinc-plating ,plating. silk screen,etc.
4.Q:How do you deal with the quality control?
A:We have 3D CMM,2D projector,salt spray test machine,colorimeter,coating thickness gauge and other measurement equipment,18 quality managements to ensure the products 100% qualified before shipment
5.Q: How do you do the packaging? does the price of product include the packaging?
A:Usually we use carton box,and add pallets and film or wooden box according to the products character or customer request,the price include packaging
6.Q:Can you give me the sample?
A:Yes,we can provide free sample less than15 dollars,however,the shipment cost should be charged by you
7.Q:How to get a formal effective quotation?
A:According to your sample or drawing,product quantity, we can within 24 hours to provide you effective quotation
8.Q:Can you provide material certificates,treatment certificates and dimensional reports?
A:Yes.the certificates can be provides per request before B/L by email.
9.Q:What software you can accept for the inquiry drawing?
A:JPG,PDF, CAD Solid works, UG ,Pro/E ,etc.
10.Q: What is the main machine in your factory ?
A: Laser cutting, NCT punching, bending machine, welding machines, punching machine etc.